Category: BASICS

Xfh has a total of 37 output reports, and today we will look at key numbers on six of these reports (output summary, cylindrical energy balance, stack monitor, convection summary, cylindrical firebox monitor, and combustion streams) using an example we modified from the Xfh training workshop. We discuss the following values,...
Visit

Most Xchanger Suite modules allow you to run an exchanger in three different modes--rating, simulation, and design. This webinar discusses each type in terms of how they differ, how to specify each type and reasons why each type is useful....
Visit

Specification of fluid properties is a crucial part of the design process. This webinar provides an overview of the fluid property specification process in Xchanger Suite. The webinar includes a discussion of HTRI recommendations, "tech tips," and a cursory discussion of special topics in fluid properties. The special topics include flash...
Visit

Xist includes two options for specifying piping geometries: simple (default) and detailed. The simple piping option requires fewer inputs but relies on several default assumptions which may not conform to the intended piping configuration. In contrast, the detailed piping option requires users to specify each piping element (e.g., straight pipe runs,...
Visit

Avoiding flow-induced vibration problems in shell-and-tube exchangers is an important task best accomplished at the design stage. Xist completes a screening analysis using mechanistic-based methods that have been validated with real cases and data. Because there are two types of vibration (tube and acoustic) and several excitation mechanisms, careful examination of...
Visit

Are you ready to build your first case in Xphe? This webinar discusses the Xphe interface, including how to navigate, use program options to model your unit, and get help. After the initial discussion on the Xphe interface, the webinar works through an example, showing you how to input geometry, run...
Visit

Are you ready to build your first case in Xphe? This webinar discusses the Xphe interface, including how to navigate, use program options to model your unit, and get help. After the initial discussion on the Xphe interface, the webinar works through an example, showing you how to input geometry, run a case, and optimize your...
Visit