Webinars

Beyond the Basics: Getting the Most Out of Xvib (January 30, 2018)

Beyond the Basics: Interpreting common Xist warning messages (August 30, 2016)

Beyond the Basics: Understanding the Simple vs. Detailed Piping Option in Xist (September 09, 2015)

Beyond the Basics: Understanding the Xist Vibration Report (December 16, 2013)

Beyond the Basics: Interpreting Xfh Output (May 12, 2011)

Beyond the Basics: Understanding Fluid Property Options (November 17, 2010)

Beyond the Basics: Rating, Simulation, or Design? Understanding Case Modes in HTRI Xchanger Suite (May 19, 2010)

Educational: Single-segmental Baffle Cut and Spacing (April 25, 2019)

Educational: Introduction to Two-phase Flow (December 04, 2018)

Educational: Introduction to Thermosiphon Reboilers (August 21, 2018)

Educational: A Layman’s Guide to CFD Webinar (June 27, 2016)

Educational: Introduction to the Design and Evaluation of Condensers in Industrial Applications (October 28, 2015)

Educational: Shell-and-tube Heat Exchangers in Refineries (April 15, 2015)

Educational: The Fundamentals of Heat Transfer Applied to Heat Exchanger Design (April 01, 2015)

Getting Started: Building Your First Case in Xspe (January 13, 2021)

Getting Started: Specifying Fluid Properties in Xchanger Suite (November 19, 2020)

Getting Started: Building Your First Case in Edgeview (September 16, 2020)

Getting Started: Building Your First Case in Xist (October 10, 2019)

Getting Started: Building Your First Case in Xace (June 25, 2019)

Getting Started: Building Your First Case in Xvib (June 06, 2019)

Getting Started: Building Your First Case in Xfh Ultra (June 19, 2018)

Getting Started: Building Your First Case in Xphe presented in Spanish (December 19, 2016)

Getting Started: Building Your First Case in Xphe (December 19, 2016)

Getting Started: Building Your First Case in Xpfe (May 21, 2014)

Getting Started: UniSim^® Feedwater Heater Modeler (January 20, 2011)

Is My Design OK? The Challenges of High Effectiveness Exchangers (June 14, 2018)

Is My Design OK? Modeling LNG Vaporizers Near Critical Point (October 31, 2017)

Is My Design OK? Lessons Learned: Falling Film Evaporators (September 28, 2016)

Is My Design OK? Trends in Process Heat Transfer Webinar (April 27, 2016)

Is My Design OK? Modeling Air Cooled Condensers with Subcooling (March 25, 2015)

Is My Design OK? Applying API 661 Annex C to Air Cooled Heat Exchanger Designs with Viscous and High Pour Point Fluids (February 25, 2015)

Is My Design OK? Design Guidance for Impingement Rods (January 21, 2014)

Is My Design OK? Designing with Dummy Tubes (November 07, 2012)

Is My Design OK? Selecting Finned-Tube Bundles (October 17, 2012)

Is My Design OK? Evaluating the Potential for Acoustic Vibration (September 19, 2012)

Is My Design OK? Heat Exchangers with Viscous Oils (May 23, 2012)

Is My Design OK? Floating Head Design and Effects on Tube Layout (March 21, 2012)

Is My Design OK? Temperature Efficiency in Design (November 09, 2011)

Is My Design OK? Thermosiphon Modeling in Xist (March 02, 2011)

Is My Design OK? Baffled by Heat Exchanger Design (July 14, 2010)

Research Update: 2020 - Year in HTRI Research (February 09, 2021)

Research Update: Predicting Heat Transfer Coefficients with an Artificial Neural Network (June 30, 2020)

Research Update: Guidelines for Vertical Tubeside Thermosiphon Reboiler Turndown (May 28, 2020)

Research Update: 2019 – Year in HTRI Research (March 19, 2020)

Research Update: Natural-draft Testing on Air-cooled Heat Exchangers (December 12, 2019)

Research Update: Insights from CFD Simulations of a Plate-and-shell Heat Exchanger (November 07, 2019)

Research Update: Thermal Performance of New Welded-plate Heat Exchanger (March 19, 2019)

Research Update: 2018 - Year in HTRI Research (February 28, 2019)

Research Update: Shellside Vacuum Condensation with Mixtures (June 07, 2018)

Research Update: Identifying Ledinegg instability in a VTTR (July 20, 2017)

Research Update: Condensation of Immiscible Fluids (June 22, 2017)

Research Update: Two-phase Flow Research - Key Findings and Impact (April 13, 2017)

Research Update: Shellside Longitudinal Liquid-phase and Flow Boiling Heat Transfer for Vertical Plain Tube Bundles (January 19, 2017)

Research Update: CFD Simulations of Forced Draft Air Coolers with Air Maldistribution (July 13, 2016)

Research Update: Air-cooler Headers: Predicting Pressure Drop and Flow Distribution (August 19, 2015)

Research Update: Boiling on Enhanced Surfaces (July 29, 2015)

Research Update: Shellside Vacuum Condensation (June 17, 2015)

Research Update: CFD Modeling of Offset Strip Plate-fin Exchanger with Vapor and Liquid Services (November 19, 2014)

Research Update: Modeling Flow Distribution in Manifolds and Headers (October 29, 2014)

Research Update: Maldistribution in Shellside Laminar Viscous Flow (September 17, 2014)

Research Update: Crossflow Mixed Convection Heat Transfer for Horizontal Tube Banks (April 09, 2014)

Research Update: Two-phase Pressure Drop across Changes in Cross-sectional Area (March 26, 2014)

Condensation Heat Transfer and Pressure Drop Measurement for Pure Hydrocarbons and Mixtures in Plain Tubes (March 05, 2014)

Research Update: Sealing Device Application (February 25, 2014)

Research Update: Applications of Crossflow Boiling Model to Low-finned Tube Bundles (August 21, 2013)

Research Update: Pressure Drop of Vacuum Condensation in a Vertical Tube (August 05, 2013)

Research Update: Mixed Convection Heat Transfer in Horizontal Tubes (July 10, 2013)

Research Update: Predicting Phase Separation in Shell-and-Tube Heat Exchangers (June 24, 2013)

Research Update: Flow Boiling Heat Transfer across Plain Tube Bundles (May 22, 2013)

Research Update: Analysis of NTIW Shellside Performance using CFD and Xist (May 08, 2013)

Research Update: Pressure Drop in Inclined Intube Downflow Condensation (April 17, 2013)

Research Update: Design and Construction of the Rotating Fouling Unit (March 27, 2013)

Research Update: Evaluation of HTFS and HTRI Shellside Condensation Methods (March 25, 2013)

Research Update: Modeling Flat Bundles in Kettle Reboilers (March 06, 2013)

Research Update: A Review of Shellside Flow Regimes (February 26, 2013)

Research Update: Quantitative Flow Visualization Techniques (May 09, 2012)

Research Update: Condensation with Desuperheating (April 25, 2012)

Research Update: Single-Phase Crossflow Methods (March 28, 2012)

Research Update: Condensation in Welded Plate Exchangers (December 14, 2011)

Research Update: Non-Newtonian Flows in Heat Exchangers (May 23, 2011)

Research Update: Crude Oil Fouling (April 27, 2011)

Sneak Preview: Xchanger Suite 8.2 (September 02, 2020)

Exchanger Optimizer: Assessing the Impact of Design Decisions (April 23, 2020)

ASME UHX Fixed Tubesheet and Expansion Joint Analysis (February 20, 2020)

Sneak Preview: Xchanger Suite 8 Embedded Costing (November 19, 2019)

Sneak Preview: SmartPM™ 4.1 (October 31, 2019)

Sneak Preview: Xfh Ultra 2.0 (August 12, 2019)

Sneak Preview: Xchanger Suite 8 (March 28, 2019)

Sneak Preview: Xfh Ultra (July 12, 2017)

Sneak Preview: HTRI’s SmartPM™ - Thermo-hydraulic Shell-and-tube Network Simulation Software for Management of Refinery Fouling (December 14, 2016)

Sneak Preview: Xpfe (October 24, 2012)

TechTip: Modeling Plate-and-Shell Heat Exchangers using Xphe (July 29, 2020)

TechTip: Challenges in Modeling Kettle Vaporizers (January 16, 2020)

TechTip: Interpreting Latent Heat Warning Messages in Xchanger Suite (July 25, 2019)

TechTip: Running Air Coolers with a Reduced Number of Fans (July 02, 2019)

TechTip: Tube Layout Design and Customization (August 24, 2017)

TechTip: Impact of Xchanger Suite 7.3 (April 25, 2017)

TechTip: Differential and Integral Flash (March 30, 2017)

TechTip: Momentum Recovery in Tubeside Vacuum Condensers (November 14, 2016)

TechTip: Vibration Analysis in U-bends (December 09, 2015)

TechTip: Impact of HTRI Xchanger Suite 7, Service Pack 2 (February 18, 2015)

TechTip: Applying the HTRI Parametric Study Tool (January 29, 2015)

TechTip: Kettle Entrainment Prediction (January 28, 2015)

TechTip: How Xist Estimates External Pressure Requirements for Pipes and Tubes (December 09, 2014)

TechTip: Self-venting Nozzles in Condensers (November 17, 2014)

TechTip: Using the HTRI Automation Server (August 27, 2014)

TechTip: Effectively Selecting Physical Properties in Xchanger Suite (June 25, 2014)

TechTip: Using the HTRI Parametric Study Tool (May 14, 2014)

TechTip: Impact of HTRI Xchanger Suite 7, Service Pack 1 (December 18, 2013)

TechTip: Service Type Defaults in Xist (October 29, 2013)

TechTip: Modeling and Designing Non-round Bundles for Kettle Reboilers (September 09, 2013)

TechTip: Using the HTRI Material Property Explorer (August 12, 2013)

TechTip: HTRI Xchanger Suite 7 Installation and Security (June 05, 2013)

TechTip: Tube Spans in the Xist Vibration Report (January 16, 2013)

TechTip: Modeling DX Evaporators (November 27, 2012)

TechTip: Modeling Subcooling in Horizontal Condensers (June 27, 2012)

TechTip: Skin Temperature Computation in Xist (April 04, 2012)

TechTip: Customized Heat Transfer and Pressure Drop Calculations in Xchanger Suite (January 25, 2012)

TechTip: Modeling Horizontal Thermosiphon Oil Coolers (September 07, 2011)

TechTip: Optimizing Tube Flow – Mechanisms and Devices (July 20, 2011)

TechTip: Improvements in Specifying EMbaffles^® (February 23, 2011)

TechTip: Impact of HTRI Xchanger Suite 6, Service Pack 3 (February 16, 2011)

TechTip: Modeling Flooded Evaporators (December 15, 2010)

TechTip: Modeling A-Frame Condensers (September 12, 2010)