HTRI Training - Russia
Moscow, Russia | August 06 - 08, 2018
HTRI and Neva-Teplotechnika Co. Ltd. invite you to join us for this training event in Russia. To get more information and to register for this training, please contact Neva-Teplotechnika Co. Ltd. at +7.812.677.9314 or [email protected].
The courses being offered include:
- Kettle Reboilers Short Course
- Heat Exchanger Fouling Short Course
- Condensers Workshop
Training Courses
- Shellside boiling methods
- Recirculation
- Liquid level and bundle dryout
- Differences between bundle composition and feed composition
- Kettle sizing
- Entrainment
- Vibration
- Fouling
- Mechanisms, mitigation, and diagnosis of crude oil fouling
- Uncertainty and design margins, including a review of open literature methods
- Overview of cooling water fouling, with discussion of the HTRI predictive model for cooling water fouling
- Risk-based design method
- No-foul design method
- Film condensation in vertical surfaces
- Condensation in horizontal tube bundles
- Interfacial vapor shear effects on condensation heat transfer
- Condensation inside horizontal tubes
- Desuperheating and subcooling
- Condensation with mixtures
- Condensation with enhanced heat transfer surfaces
- Two-phase pressure drop
- Venting inerts
- Drainage
Kettle Reboilers Short Course
Instructors: Andy Mountford and Hans Zettler
Thermal design methods for kettle reboilers have evolved over the years and old rules-of-thumb no longer apply. New research results, software advances, and feedback from industry all contribute to improved design practices. The course presents the most up-to-date research in kettle reboilers, provides our current recommendation to use Xist to model kettles accurately, and discusses future research and software development to improve predictions. Many example problems illustrate recommended good practices for using Xist, interpreting warning messages, improving designs, and troubleshooting cases.
Key Topics
Suggested Participants
Thermal design engineers and heat exchanger experts
Heat Exchanger Fouling Short Course
Instructors: Andy Mountford and Hans Zettler
Industry experience indicates that using traditional methods in heat exchanger design for fouling service may result in excessive heat transfer area in some applications and promote fouling in others.
This course reviews issues with fouling and several methods used in designing heat exchangers for fouling service.
Key Topics
Suggested Participants
Engineers who specify, rate, and/or analyze heat exchangers in fouling service
Condensers Workshop
Instructors: Andy Mountford and Hans Zettler
Learn the fundamentals of condensation mechanisms and how they apply to condenser designs! Apply guidelines to develop Xchanger Suite cases for accurate assessment of performance. This course provides a foundation for understanding the basis for thermal design of typical industrial heat exchangers.
Key Topics
Suggested Participants
Engineers who design and evaluate condenser equipment
Neva-Teplotechnika Co. Ltd.
Malinovskaya str. 8, room 12H
196602 Pushkin, Saint Petersburg
Russia
+7.812.677.9314 office
+7.812.677.9314 fax
[email protected]
Hans U. Zettler
[email protected]
Instructors
Senior Consulting Engineer, Technical Services and Sales, provides technical support and training for HTRI. He earned a BSc and MSc in Chemistry and a PhD in Organometallic and Materials Chemistry from the University of East Anglia, Norwich, UK. During his tenure there, he conducted research at Wolfson Laboratory for Materials and Catalysis. He previously held the position of Thermal Design Supervisor at Tecnicas Reunidas in Madrid, Spain, gaining valuable experience using HTRI methods and software. Mountford oversaw the development of several high-profile PWR and BWR nuclear plant projects, as well as gained valuable experience in the thermohydraulic design of heat transfer equipment for the petrochemical and nitric acid/nitrates industries. His experience in using HTRI Xchanger Suite makes him uniquely qualified to bring an end-user’s perspective to the HTRI training program and to share techniques for effectively working with the software.
Vice President, Global Sales & Marketing, joined HTRI while completing his PhD in Chemical Engineering at the University of Surrey, Guildford, UK. His doctoral work focused on fouling and design of compact heat exchangers. He also possesses a mechanical engineering degree (Dipl.-Ing.) from the Technical University Karlsruhe, Germany. Zettler completed multiple internships in industry throughout Europe while pursuing his education. Zettler is responsible for Sales in Europe, the Middle East, and Africa. He is a member of the German Engineering Society (VDI), a member of the VDI-GVC Working Party on Heat and Mass Transfer, an associate member of the Institution of Chemical Engineers (IChemE), and a committee member of the Heat Transfer Society, United Kingdom.
Venue
105613, Izmaylovskoye Shosse, 71,
Corps 4G-D
Moscow, Russia
Hotel Information
Training will be held in conference room "Gzhel"