HTRI Conference Presentations
Each year HTRI hosts several technical conferences for our members around the world. At these events, you can meet with our staff, discuss issues with other members, and learn more about how our products and services can benefit you. Below are listed the technical presentations made at the Global Conference (previously called the North American Meeting) since 2010. The lists may include links to some of the presentations made that year.
2012 Global Conference (Salt Lake City, Utah, USA)
- CFD simulation of NTIW shellside single-phase flow
- Comparison of HTRI and HTFS crossflow boiling methods
- Condensation in inclined tubes: Data and method evaluation
-
- Evaluation of HTFS tubeside condensation methods
- Flow boiling across tube bundles
- Flow distribution with perforated plates
- Garnet
- Heat exchanger design issues
-
- Improved single-phase methods for low-finned tube bundles
- Intube propane condensation study: Test rig and initial data with n-pentane
- Lessons learned from Engineering Services
-
- Single-phase heat transfer and pressure drop methods for plate-fin heat exchangers
- Swirl flow research
- Xpfe: Modeling plate-fin heat exchangers the easy way
2011 North American Meeting (Amelia Island, Florida, USA)
-
- Condensation in micro-finned tubes: Review of methods
- Convective heat transfer with non-Newtonian fluids: An introduction
- Flooding in inclined tubes
- Flow demonstration unit
- Flow visualization in a transparent shell-and-tube heat exchanger
- Heat exchanger design discussion
- Lessons learned from Technical Support
- New tube layout in Xist
- Onset of nucleate boiling for shellside flow
- Plans for HTRI research and software
- Pressure drop in upflow boiling across horizontal tube bundles
- Research update: Crude oil fouling
- R-trend capabilities
- Shellside mixed convection for liquids
-
-
- Tubeside mixed convection in liquid flows
- Vacuum condensation: Experimental capability and initial data
- Virtual air cooler: Approach and calibration
2010 North American Meeting (Calgary, Alberta, Canada)
-
- Capabilities of UniSim FeedWater Heater Modeler
-
- Crossflow heat transfer and pressure drop validation
- Improvement of pressure drop method for horizontal tubeside condensation
- Introduction to UniSim Plate Fin Exchanger Modeler
- Modeling tubeside condensation with CFD
- Panel discussion: Heat exchanger design case studies
- A prototype method for laminar tubeside heat transfer
- Research in FY 2011 and beyond
-
- Software: Status and next release
- Technical overview of Honeywell documentation
Check the Upcoming Events calendar to find an event in your area.